GE IS415UCVHH1AB Mark VI VME Processor Board

Configured for high-speed process control in Mark VI systems, the GE IS415UCVHH1AB (IS415UCVHH1A VME Processor Board) provides direct physical/electrical execution.

Hardware Specifications

Backplane Bus Communication Velocity and Firmware Compatibility

• The processor module executes high-speed data transfers across the standard VME backplane bus, interfacing directly with I/O pack networks. System architectures support simplex, duplex, and triple modular redundancy (TMR) topologies to enforce deterministic control execution.
• Onboard firmware initializes the Intel 1.06 GHz processor engine alongside 1 GB SDRAM to run real-time control algorithms without processing bottlenecks. Dual RJ-45 Ethernet ports facilitate continuous, full-duplex network data exchange across redundant control channels.

Frequently Asked Questions

Q: What network interface options are integrated on the front panel of this processor card?

A: The card features dual 10BaseT/100BaseTX Ethernet ports utilizing standard RJ-45 connectors for system communication.

Q: Does this VME board support redundant system architectures?

A: Yes, the module supports simplex, duplex, and triple modular redundant (TMR) system configurations.

Field Installation Guidelines

• Ensure the VME rack assembly is completely powered down before inserting or removing the processor card from its slot.
• Align the board edge connectors accurately with the backplane guide rails and slide the card in until the front levers lock into place.
• Fasten the top and bottom retaining screws on the front panel to ensure solid chassis earth grounding and mechanical stability.
• Connect shielded CAT5e or CAT6 network cables into the dual RJ-45 Ethernet ports, maintaining proper strain relief to prevent port damage.