General Electric IC695CPE310 CPU module

The IC695CPE310 is a CPU module within the GE Fanuc PACSystem RX3i Series, designed for real-time control of machines, processes, and material handling systems. This controller communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane. With a 1.1 GHz Atom processor, the IC695CPE310 offers high-performance processing and efficient data handling for industrial automation tasks.

Key Features:

• Processor: 1.1 GHz Atom processor for real-time control.

• Memory: 10 MB CPU memory to handle multiple tasks and processes.

• Embedded Ethernet: Dual Ethernet connections, rated for 10Mb/sec and 100Mb/sec speeds.

• Serial Ports: RS-485 and RS-232 for communication.

• Program Blocks: Up to 512 blocks, with each block capable of holding up to 128 KB.

• Supported Protocols: Supports Modbus RTU Slave, SNP, and Serial I/O protocols.

• Programming Languages: Compatible with Ladder Diagram, Structured Text, C, and Function Block Diagram for programming.

• LED Indicators: Green, red, off, or blinking for easy status verification and troubleshooting.

• Installation: Can be installed in any pair of slots in the RX3i controller rack, except the two highest-numbered slots.

• Upgrade: Offers a 3x faster processing speed compared to the 300 MHz Celeron processor in the IC695CPU310, and is compatible with legacy PME software.

Note: The RS-232 port on the IC695CPE310 does not provide 5V power on pin 5.

Technical Specifications:

Installation and Usage:

• Backplane: The IC695CPE310 must be installed in the central universal backplane of the RX3i PACSystems machine control system.

• Unsupported Backplanes: The module will not function properly if installed in an expansion backplane or a remote backplane.