General Electric IS200VSVOH1B VME Servo Card

The General Electric IS200VSVOH1B, also cataloged as the IS200VSVOH1B PC Board, operates as a dedicated hardware component for servo control execution within VME-based industrial control platforms.

Hardware Specifications

Profinet / EtherNet/IP Deterministic Networks and I/O Scaling

The VME servo architecture relies on high-speed backplane bus communication velocity and deterministic network compatibility to ensure precise actuator positioning and valve regulation. I/O density scaling allows seamless integration of feedback loops and control channels across distributed automation nodes. Firmware flash compatibility maintains network interoperability and configuration management within complex turbine and heavy industrial control schemes.

Frequently Asked Questions

Q: What system interface feature is integrated onto the IS200VSVOH1B board? A: The board features an onboard J55 terminal port for external signal connection.

Q: Does the module support hot-swapping during active operation?

A: Hot-swapping VME circuit boards while backplane power is active is restricted to prevent electrical faults, bus disruption, and component damage.

Q: How is the servo card installed into the control chassis? A: It mounts as a PC board add-on component into designated VME rack slots utilizing internal backplane connectors.

Field Installation Guidelines

1. Mount the printed circuit board securely into the designated VME rack slot to support its 1.40 lbs weight.
2. Ensure proper electrostatic discharge (ESD) wrist grounding protocols are observed prior to handling or inserting the board.
3. Align the board edges carefully with the chassis guide rails to prevent bending pins on the VME backplane connectors.
4. Verify all terminal connections at the J55 port and confirm system power levels before energizing the control assembly.