Honeywell FS-CCI-HSE-02 Industrial Communication Cable

Configured for high-fidelity data transmission in distributed control architectures, the Honeywell FS-CCI-HSE-02 (FS-CCI-HSE-02 Industrial Communication Cable) provides direct physical/electrical execution. It functions as the physical layer media carrying critical operational data between field network nodes, sensors, actuators, and central process controllers.

Hardware Specifications

DCS Loop & Fieldbus Integration Characteristics

• 4-20 mA HART Loop Protocol Noise Suppression:

  Features an integrated shielding design that blocks electromagnetic interference (EMI) and radio frequency interference (RFI), maintaining loop signal fidelity for overlapping 4-20 mA HART analog signaling lines.

• FOUNDATION Fieldbus / Profibus PA Signal Stability:

  The 22 AWG twisted-pair geometry provides structured characteristic impedance matching, reducing signal reflections and propagation delays across industrial automation networks.

• High Channel-to-Channel Isolation Support:

  The multi-conductor configuration combined with the flame-retardant PVC jacket provides robust mechanical and electrical isolation, preventing ground potential loops between non-isolated I/O cards.

Frequently Asked Questions

Q: Can this cable be run through drop ceilings and air handling spaces without conduit?

A: Yes. The FS-CCI-HSE-02 features a plenum-rated PVC jacket designed for low flame spread and minimal smoke generation, making it fully compliant for installation within environmental airspaces.

Q: How does the jacket material handle exposure to industrial fluids?

A: The outer PVC jacket is engineered to resist degradation from industrial chemicals, oils, and moisture, preventing premature insulation breakdown and maintaining long-term physical durability.

Q: Does this cable support high-speed Ethernet communications?

A: The 22 AWG shielded configuration is optimized for standard field industrial network protocols, data acquisition, and sensor/actuator bus links; for high-speed Ethernet (e.g., Cat 6 HSE), verified category ratings must be cross-checked against system requirements.

Field Installation Guidelines

• Maintain a minimum bend radius of 8 times the overall cable outer diameter during deployment to avoid physical stress on the internal shielded twisted pairs.
• Ensure the internal shield drain wire is terminated to a single verified functional earth ground point within the marshaling cabinet to eliminate potential ground loop currents.
• Route this data communication cable away from high-power AC motor lines and switching drives, preserving a minimum physical separation distance of 300 mm in unshielded cable trays.