Line Interface Module | Allen-Bradley 2094-BL02 Kinetix 6000

The 2094-BL02 is a 15 kW Line Interface Module (LIM) engineered for the Allen-Bradley Kinetix 6000 motion control system. Serving as a centralized power management hub, it integrates incoming main line filtration, auxiliary control power regulation, and brake I/O voltage distribution within a unified chassis, replacing discrete cabinet components and streamlining power wiring for multi-axis configurations.

Power Distribution and Electrical Capabilities

Operating on a 3-phase incoming supply of 400/460 VAC at 50/60 Hz, the module delivers up to 30 A continuous current to power downstream servo drive power structures. It incorporates an internal 230 VAC control line filter alongside an integrated power supply producing a 24 VDC output rated at 8 A to power control logic, system diagnostics, and brake circuits.

Connector Set and Interface Wiring

The 2094-BL02 features a standardized connector arrangement for main line input (IPL), load output (OPL), control power (CPL), and 24 VDC brake I/O power (PSL). Designed for integrated system integration, it simplifies power sequencing across connected drive frames while reducing individual component wiring requirements within the electrical enclosure.

Enclosure and Mounting Requirements

Proper operation requires installation inside a grounded enclosure conforming to EN 60529 / IEC 529 standards to prevent unauthorized operator access. To maintain CE and UL compliance, the unit must be mounted on a flat, rigid vertical surface protected from excessive vibration, moisture, oil mist, dust, and corrosive atmosphere.

Technical Specifications

Installation Guidelines

Mount the module on a flat, grounded vertical panel inside an IP66 / NEMA 4X rated protective enclosure. Ensure adequate clearance for airflow around the module chassis and keep connection points free from industrial contaminants such as dust, oil mist, or moisture during wiring and installation.

Frequently Asked Questions

Q: What power output ratings does the internal 24 VDC supply on the 2094-BL02 provide? A: The internal power supply provides a regulated 24 VDC output with a current capacity of up to 8 A for auxiliary control power and brake I/O operations.

Q: Is the 26-pin I/O connector included with the 2094-BL02 module? A: No, the 26-pin I/O connector used on 2094-BL02 and 2094-AL09 models is not supplied with the standard connector set and must be sourced separately.

Q: What type of panel enclosure is required for mounting the 2094-BL02? A: The module must be installed in a grounded enclosure meeting EN 60529 (IEC 529) protection standards. A NEMA 4X / IP66 rated enclosure fulfills these requirements by preventing ingress of moisture, corrosive vapors, and dust.