Schneider BMXRMS008MP Memory Boards

The Schneider BMXRMS008MP, also cataloged as the BMXRMS008MP 8 MB SD flash memory card, operates as a dedicated hardware component for firmware and application data storage across Modicon M340 PLC processor platforms.

Suffix Breakdown & Model Matrix

Hardware Specifications

Backplane Bus Communication Velocity & Firmware Flash Compatibility

Engineered to interface directly with Modicon M340 central processing units, the Schneider BMXRMS008MP memory card stores compiled application logic, symbol tables, and system firmware backup files. High-speed internal controller bus integration enables fast read and write cycles during program transfers and boot-up sequences. The 8 MB capacity provides sufficient data retention space for large control programs and historical data storage across compatible BMXP34 and BMXPRA processor variants.

Frequently Asked Questions

Q: What processors are compatible with the Schneider BMXRMS008MP memory card?

A: It is compatible with BMXP342010, BMXP342000, BMXP341000, BMXP342030, BMXP342020, and BMXPRA0100 processors.

Q: Can the memory card be inserted or removed while the processor is powered on?

A: No, power to the CPU rack must be switched off before inserting or extracting the SD card to prevent data corruption or memory register damage.

Q: What is the total storage capacity of the BMXRMS008MP card?

A: The card provides 8 MB of flash memory for application storage.

Field Installation Guidelines

Ensure the PLC rack power supply is completely switched off before handling the memory card. Open the processor card memory door and gently push the BMXRMS008MP card into the dedicated SD slot until the internal spring-loaded latch clicks securely into place. To remove, push inward slightly to release the locking mechanism and pull the card straight out. Verify that the processor reads the card correctly by checking the system status LEDs after restoring rack power.