Schneider Electric TSXPSY3610M Power Supply Module

The TSXPSY3610M is a double-format 24 VDC power supply module engineered for the Schneider Electric Modicon Premium automation platform. Operating on a nominal 24 VDC primary supply (acceptable range 19.2 to 30 VDC), it delivers power directly to the rack backplane to energize connected processor, communication, and I/O modules, while providing an auxiliary 24 VDC output dedicated to relay drive circuits. Equipped with front-panel LED local signaling, integrated secondary protection, and an IP20 enclosure, the TSXPSY3610M ensures stable, uninterrupted operational power across demanding PLC control architectures.

Power Distribution & Output Characteristics

The module draws up to 2.7 A of input current at 24 VDC, managing an activation inrush current up to 150 A. It converts the primary supply into two regulated secondary DC outputs: a 5 VDC rail providing up to 7 A (35 W) for backplane electronics and logic circuits, and an auxiliary 24 VDC relay supply delivering up to 0.6 A (19 W). Together, these outputs support a total useful secondary power rating of 50 W, with internal circuitry protected against secondary short circuits, overvoltages, and current overloads.

Status Diagnostics & Environmental Limits

Three front-panel LEDs provide real-time diagnostic signaling for rapid troubleshooting: a green LED indicates normal voltage presence (OK), a green LED displays 24 V sensor/relay voltage status, and a red LED signals a RAM backup battery fault (BAT). Designed to withstand harsh industrial panel conditions, the unit supports an operating temperature range of 0 to +60 deg C (storage temperature from -25 to +70 deg C), a relative humidity tolerance of 10 to 95% non-condensing, and immunity to microbreaks up to 1 ms.

Technical Parameters

Frequently Asked Questions

Q: What is the difference between the TSXPSY3610M and standard TSXPSY3610 part numbers? A: The "M" suffix in Schneider Electric Modicon Premium power supplies designates standard commercial packaging/conformal coating compliance variants; both share core electrical ratings including 24 VDC primary input and identical double-rack mounting requirements.

Q: How does the red BAT LED behave on the front panel of the TSXPSY3610M? A: The red BAT LED illuminates when the internal RAM backup battery voltage drops below its safe operational threshold, signaling that the battery must be replaced to prevent program memory loss during line power disconnection.

Q: What are the output power allocation limits for this module? A: The module supplies a maximum of 35 W (7 A) on the 5 VDC backplane bus and 19 W (0.6 A) on the 24 VDC auxiliary relay supply, with a combined total output limit of 50 W.