Allen Bradley 1756-IF8H Analog Input Module

Allen Bradley 1756-IF8H Analog Input Module

Description 1756-IF8H

Allen Bradley 1756-IF8H ControlLogix Analog Differential Input HART 8-Points, A

Allen Bradley 1756-IF8H ControlLogix Analog Differential Input with HART Protocol, Current/Voltage, 8-Points 36-Pin, Series A

1756-IF8H Specification

Manufacturer: Rockwell Automation

Brand: Allen-Bradley

Part Number/Catalog No.: 1756-IF8H

Series: ControlLogix

Module Type: Hart Analog Input Module

Channels: 8 Differential

Backplane Current (5.1 Volts DC): 300 milliamps

Backplane Current (24 Volts): 70 milliamps

Power Dissipation (Max):3.21-4.01 Watts

Thermal Dissipation: 13.7 BTU per hour

Resolution: 16-21 bits

Enclosure: Open

RSLogix 5000 Software: Verson 8.02.00 or later

1756-IF8H Introduction

The Allen-Bradley 1756-IF8H is a HART Analog Module that belongs to the ControlLogix system.It requires a 36-position spring clamp RTB or removable terminal block housing, and it can either be the 1756-TBCH or 1756-TBS6H and is compatible with the HART 5, 6, and 7. 8 differential voltage or current inputs are available for this module, with one HART modem per module. This 1756-IF8H input module receives signals from process value transmitters and then converts them to the corresponding measurement values for use in the Logix controller. The 1756-IF8H has three data formats for you to choose from using the Studio 5000 Logix Designer: analog only, analog and HART PV, and analog and HART by channel. If you want the members of the tag to be arranged like those of non-HART analog input modules, you should choose the analog and HART PV format. Analog values are grouped together near the end of the tag, making it easier to view all 8 analog values at the same time. But if you want the Status, Analog Value, and Device Status for every channel to be grouped together in a tag, you should choose the analog and HART by channel format. This will make it easier for you to view all data related to a field device.

Using this module will let you have an analog and HART connectivity in one module. HART commands can be transmitted as unscheduled messages with the 1756-IF8H. It also supports asset management software to the HART device and there are no external hardware requirements needed for accessing the HART signal. Other features of the 1756-IF8H include multiple current and voltage input ranges, real-time sampling, process alarms, wire-off detection, module filter, under-range, and over-range detection, rate alarm, and highway addressable remote transducer (HART) communication. The 1756-IF8H has variable operational ranges for every channel in the module. Possible ranges for you to choose from include -10 to 10 Volts, 0 to 5 Volts, 0 to 10 Volts, 0 to 20 milliamps, and 4 to 20 milliamps, with HART instruments using the latter range. The resolution of this module ranges from 16 to 21 bits. Backplane voltage and current ratings are 5.1 Volts DC, 300 milliamps, 24 Volts DC, and 135 milliamps and its total backplane power is 4.77 Watts. Voltage power dissipation is 3.21 Watts and 4.01 Watts for the current and it also has maximum overvoltage protection of 30 Volts DC (voltage) and 8 Volts DC (current).

For more details and to purchase the 1756-IF8 module, please visit our product page.

Hot Selling