Bently Nevada 21000-16-10-15-054-03-02 Proximity Probe Housing Assembly

Configured for physical-layer environmental isolation and transducer tracking in machinery protection systems, the Bently Nevada 21000-16-10-15-054-03-02 (21000 Proximity Probe Housing Assembly) provides direct physical/electrical execution. It establishes rigid casing protection and mechanical deployment parameters natively at the machine interface tier to isolate sensitive sensor components parallel to master monitoring rack execution bus cycles.

Hardware Specifications

Machinery Monitoring & Sensor Signal Integration

• Eddy-Current Probe Scaling and Structural Stiffness: The 21000 housing assembly locks the 3300 XL 8 mm probe into a rigid mechanical column. This structural stiffness suppresses local casing resonances, ensuring that eddy-current probe scaling operates linearly without signal distortion induced by external machine-frame harmonics.
• Gap Voltage Validation and Depth Settings: The fixed 54 mm penetration depth maintains the probe tip precisely within its calibrated measurement field. This stable positioning allows field technicians to execute predictable gap voltage validation (-10 VDC targets) across static and dynamic operating conditions.
• Cross-Talk Suppression and Shield Boundaries: The heavy metal external casing forms a continuous Faraday shield around the internal 1.0 m sensor cable connection. This configuration routes high-frequency industrial emissions directly to structural ground, facilitating continuous cross-talk suppression between close-paired sensor runs.

Frequently Asked Questions

Q: What specific hardware behaviors manifest if the housing assembly is torqued into the casing beyond designated mechanical limits?

A: Over-torquing strips or deforms the process threads, compromising the environmental seal. It can also warp the internal alignment sleeve, binding the sensor probe sheath, shifting the preset 54 mm penetration depth, and risking physical cracking of the eddy-current probe tip.

Q: How does this housing configuration protect the internal 1.0 m cable connector from process fluid contamination?

A: The housing features internal rubber compression seals and an external NPT conduit connection block. When assembled with thread sealant, these boundaries form an airtight barrier that blocks moisture, synthetic lubes, and industrial splash oils from entering the junction.