Bently Nevada 3500/65 184469-01 Module

General 184469-01

Manufacturers: GE / Bently Nevada

Model: 3500/65

Condition: New From Surplus Stock

Product Family: 3500/65, 3500-65, 3500 65, 16-Channel Temperature Monitor, Sixteen-Channel Temperature Monitor

Bently Nevada 3500/65 184469-01 Module

Bently Nevada 3500/65 184469-01 Module

Bently Nevada 3500/65 184469-01 Module

With the development of the PROGRAMMABLE controller, its programming software presents diversification and advanced development trend.

Due to the various types of PROGRAMMABLE controllers, the corresponding programming software of different models is also different to some extent, especially among the programmable controllers of different manufacturers.

Their programming software cannot be universal, but the PROGRAMMABLE controllers produced by the same manufacturer can generally be used.

This is to the attention of the reader.

Product Introduction

Bently Nevada 3500/65 184469-01 Module

Bently Nevada 3500/65 184469-01 Module

Bently Nevada 3500/65 184469-01 Module

Bentley 3500/65 pre-execution phase.

In the process of executing the user program, PLC in accordance with the trapezoidal diagram program scanning principle.

Generally speaking, PLC from left to right, from the top to the bottom step by step to execute the program.

However, if a program jump instruction is encountered, the program jump address is determined according to whether the jump condition is met.

Program execution process, when the instruction involves the input, output state, PLC from the input image register "read in" corresponding input terminal state, from the output image register "read in" pair

3500/65 16 channel temperature monitoring

The 3500/65 monitor provides sixteen channels for temperature monitoring and receives a resistance temperature detector (RTD) and isolated thermocouple (TC) temperature input.

Monitor the conditions and compare them to the user-programmable alarm set values for these inputs.

The monitoring program USES 3500 rack configuration software.

The software can be configured with 16-channel temperature monitoring that accepts isolated tip thermocouples, 3-wire resistors, 4-wire resistors, or a mixture of them for TC and RTD inputs.

When used in a three-mode redundant (TMR) configuration, the temperature display must be installed adjacent to the other three sets.

In this configuration, the monitor USES two types of voting to ensure accurate operation and avoid a single point of failure.

Related Recommend