Emerson EPRO CON010+PR6424/010-040 Vibration Measurement System

Product Overview

The Emerson EPRO CON010 + PR6424/010-040 is a high-precision eddy current measurement suite designed for the continuous monitoring of critical rotating machinery. This integrated solution pairs the CON010 sensor module (signal converter) with the PR6424/010-040 proximity probe to deliver real-time data on shaft displacement and radial vibration. Engineered for mission-critical environments, this system provides the diagnostic accuracy required to prevent catastrophic equipment failure in power plants, refineries, and heavy industrial facilities.

Technical Specifications

• System Components: CON010 Sensor Module + PR6424/010-040 Proximity Probe

• Measurement Technology: Non-contact Eddy Current

• Probe Length: 40 mm (Compact series)

• Power Supply: 24V DC (System dependent)

• Operating Temperature: -40 °C to +70 °C

• Environmental Resistance: ISA-S71.04-1985, Class G3 (Harsh airborne contaminants)

• Mechanical Integrity: 10 g Shock resistance; 0.7 g Vibration endurance (13.2–150 Hz)

• Protection Rating: IP20 (Module)

• Relative Humidity: 5–95%, non-condensing

Core Engineering Features

• Integrated Measuring Chain: By combining the signal converter and probe into a matched set, the system ensures optimal linearization and minimizes calibration errors across the measurement range.

• Non-Contact Precision: Utilizing eddy current technology allows for accurate distance sensing without physical contact, eliminating mechanical wear and enabling long-term stability on high-speed shafts.

• Compact Installation Footprint: The 40 mm probe length is specifically designed for mounting in tight machine housings or restricted bearing pedestals where standard-sized probes cannot fit.

• Ruggedized for Harsh Sectors: Specifically rated for Class G3 environments, the system is protected against corrosive gases and airborne contaminants common in chemical processing and energy distribution.

• Standardized Monitoring Output: Seamlessly integrates with Emerson EPRO monitoring platforms and standard DCS/PLC architectures to provide continuous feedback for predictive maintenance.