GE Fanuc IC670ALG310 Analog Output Module

IC670ALG310 Info.

The GE IC670ALG310 module is a voltage-source analog output module.

It is designed with 8 different channels for voltage outputs that can be auto scaled as configured by the operators.

The module takes the input from the bus interface unit that is connected to it and enhances the data for calibration and converts the data into output voltage in a range between -10 and +10 Volts.

The IC670ALG310 output module has enhanced diagnostics.

It can easily detect over range and under range situations, loss of user power, and an uncalibrated module.

The output module also features alarms that can be set by the users for different events.

The module treats output values as under range and over range when they do not meet the th 50 millivolts requirement of module's maximum or minimum output settings.

The IC670ALG310 output module is compact in size and it can fit into small spaces.

For input data, it takes 0 to 8 words of analog output data, 0 to 3 bytes of input data for the module and channel status, and 0 to 2 bytes of output data for clearing alarms.

All of the data exchanges takes place between the output module and the bus interface unit.

The IC670ALG310 output module comes with a "Channel Active" feature that lets the operators configure an individual channel as either active or inactive.

The module also comes with local output default features that help to configure the data to the default settings or to zero for the module data in the bus interface unit.

The module draws 170 milliamps of current from the bus interface. The resolution of the module is 14 bits and the magnitude data size is 14 bits.

Technical Information

The IC670ALG310 analog voltage output module is an 8-channel analog voltage-source output module designed for the GE Fanuc Genius Field Control station.

This module has 8 individually-isolated outputs in 2 groups of 4 output points each, and each output channel provides a 14-bit output voltage range of -10 Volts DC to 10 Volts DC.

The IC670ALG310 analog voltage output module receives output data in digital engineering units from the host and it scales the data according to the configured scaling parameters and then converts the data to -10 Volts DC to +10 Volts DC rated output voltage signals.

It has a built-in diagnostic function that provides over/under-range alarms (in case the engineering units from the host result in an output value that exceeds or falls below the rated limits) and power loss fault reporting.

Other standard features include individual channel configuration, support of both “Word” and “Bit” type data, and support for field calibration with the ability to store calibration data.

The IC670ALG310 analog voltage output module has 8 single-ended outputs that require an 18 to 30 Volts DC external power supply for operation and each output draws 170 milliamps of backplane current.

The IC670ALG310 analog voltage output module is compatible with only Genius Field Bus Interface Units that are revision 2.0 or later, and unlike other modules in its family, it can only be configured from the Bus Interface Unit (BIU) via a compatible hand-held monitor (HHM).

The handheld programmer can be used to configure the module scaling parameter level as well as to configure the module for either active or inactive modes.

The IC670ALG310 analog voltage output module is installed on an I/O terminal block, which provides a terminal base for field-side wiring, and it comes with a diagnostic and status LED indicator.

Date of IC670ALG310

Brand： GE Fanuc

Series： Rx7i PACsystem

Part Number： IC670ALG310

Description： Analog output module

Voltage： -10 to 10 Volts

Over/Under Range： 50 mV

Current Drawn From Bus： 170 mA

Resolution： 14 bits

Magnitude： 14 bits

Input Data： 0-8 words, 0-3 bytes, 0-2 bytes

Hot Selling