GE Fanuc IC697CPX935 Central Process Unit

GE Fanuc 90-70 IC697CPX935 96Mhz, 32-Bit, Floating Point, 1 MByte Fast Memory CPU is a single slot CPU with three serial ports. GE Fanuc 90-70 IC697CPX935 supports 12K inputs and outputs (any mix), and up to 8K analog I/O. GE Fanuc 90-70 IC697CPX935 incorporates a 86 MHz, 80486DX4 microprocessor.

The GE Fanuc IC697CPX935 CPU is a single-slot PLC CPU manufactured by GE Fanuc as part of the GE Intelligent Platforms/GE Fanuc PLC Series 90-70 product line. This module comes with 3 built-in serial ports and it can perform the real-time control of systems. The IC697CPX935 CPU communicates with various intelligent option modules through the rack mounted on the backplane by using VMEC.1 format. The CPU runs with a connection to a computer through software or by the use of a 3-position run and stop control switch. It also comes with a 96 MHz microprocessor, which enables the device to perform floating-point calculations after every 0.4 microseconds. The IC697CPX935 CPU supports any combination of 12,000 inputs and outputs and up to 8000 analog inputs and outputs.

GE Fanuc IC697CPX935 Features

-Single-slot CPU with three serial ports

-Provides 1 Mbyte of battery-backed memory in the same slot

-Contains 256K of non-volatile user flash memory

-Supports BMA in release 7.92 and later

-Supports floating point calculations

-12K inputs and outputs (any mix), and up to 8K analog I/O

-0.4 microseconds per boolean function

-96 MHz, 80486DX4 microprocessor

-Supports IC66 (can be IC660 or IC661) and IC697 I/O

-Programmed by MS-DOS software products, or Windows-based software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through an SNP port

-Configurable data and program memory

-Battery-backed calendar clock

-Three-position operation mode switch

-Password controlled access

-Remote programmer key switch memory protection

-Seven status LEDs

-Software configuration (No DIP switches or jumpers)

-Reference information inside the front door

-In-system upgradable firmware

GE Series 90-70

IC697ACC701 Battery Lithium 3V 1400MAH 2/Package

IC697ALG230 Analog Input 8PT

IC697ALG320 90-70 or Rx7i Analog Output, Voltage/Current, 4

IC697ALG440 Analog Input Expander, Current

IC697ALG441 Analog Input Expander

IC697BEM711 I/O Bus Receiver

IC697BEM713 Bus Transmitter FOR I/O EXPANSION

IC697BEM721 Genius I/O Bus Controller

IC697BEM731 Genius I/O Bus Controller

IC697BEM733 Genius Remote I/O module

IC697BEM741 FIP Bus Contrlr.

IC697BEM744 FIP Bus Controller

IC697BEM761 I/O Interface for Series Six PLC

IC697BEM763 DLAN Drive Interface

IC697CGR772 Redundant CPU 2K Discrete I/O

IC697CGR935 Dual Bus CPU 12K Discrete IO

IC697CHS750 I/O Rack 5 Slots Rear Mount

IC697CHS782 17 Slot Rack Rear Mount

IC697CHS783 Integrators Rack, 17 Slots Front Mount

IC697CHS790 17 slot Rack, 9 Slots, Rear Mount

IC697CHS791 I/O Rack, 9 Slots, Front Mount

IC697CMM711 PLC Communications Coprocessor

IC697CMM741 Ethernet MMS Lan Interface

IC697CMM742 With Transceiver Ethernet Interface

IC697CPM790 GMR Redundancy 90-70 CPU, 486, 2K

IC697CPM914 GMR Redundant CPU

IC697CPM915 Central Processing Unit

IC697CPM924 CPU processor

IC697CPM925 CPU Processor Unit Faster

IC697CPU731 Central Processing Unit 512 Discrete IO

IC697CPU732 CPU PROCESSOR w/ Floating Pt

IC697CPU771 CPU without Floating Pt.

IC697CPU772 CPU W/ Floating point math

IC697CPU780 Central Proc. Unit Module