GE Fanuc Field Control IC670MDL640 Output Module

GE field control IC670MDL640 24 VDC positive/negative input module provides a set of 16 discrete inputs. The resistor and capacitor network establishes the input threshold and provides input filtering GE field control IC670MDL640. Each input on GE Field Control IC670MDL640 can be driven by positive or negative logic.

Revision Numbers

IC670MDL640A, IC670MDL640B, IC670MDL640C, IC670MDL640D, IC670MDL640E, IC670MDL640F, IC670MDL640G, IC670MDL640H, IC670MDL640I, IC670MDL640J, IC670MDL640K, IC670MDL640L, IC670MDL640M, IC670MDL640N, IC670MDL640P, IC670MDL640Q, IC670MDL640R, IC670MDL640S, IC670MDL640T, IC670MDL640U, IC670MDL640V, IC670MDL640W, IC670MDL640X, IC670MDL640Y, IC670MDL640Z

This module is a positive/negative input module designed to provide 16 independent inputs driven by negative or positive logic. GE Fanuc IC670MDL640 discrete input module is a member of the GE Field Control I/O module series. Its rated voltage is 24 V DC, and the input voltage range is 0 to 30 V DC. Under 24 volts direct current, the user input current of this module is 7.5 mA per point. This module is a positive/negative input module designed to provide 16 independent inputs driven by negative or positive logic. Other noteworthy input characteristics include 3.0 to 8 mA on-state current and 0 to 1.5 mA off-state current. It's opening and closing response times are 6 milliseconds (typical value) and 10 milliseconds (maximum) respectively.

Each input point of the GE Fanuc IC670MDL640 discrete input module has an LED indicator to show the status of each input point. The input is designed to receive current from various input devices and provide it to the negative or common power bus. On the other hand, a negative input provides current to various input devices and also receives current from a positive or common power bus. There is also a "PWR" LED indicator, which indicates the presence of on-site power and backplane power. IC670MDL640 discrete input module with positive or negative input logic can be used for all 16 input points. Regardless of the logic used, as long as the switch is closed, the signal will generate a logic 1. The selection -/+ operation depends on the external power supply connected to the input and output terminal blocks.

You May Also Interested