GE FANUC IC697MDL250 32 Point Input Module

GE Fanuc 90-70 IC697MDL250 uses mechanical keying to ensure the correct replacement of similar types of products in the field. It is a 120 volt AC 32-point input module that provides four independent groups, each with 8 points of 32 input points. In this way, each group of eight points can be used for different phases of the AC power supply of GE Fanuc 90-70 IC697MDL250.

Revision Numbers

IC697MDL250A, IC697MDL250B, IC697MDL250C, IC697MDL250D, IC697MDL250E, IC697MDL250F, IC697MDL250G, IC697MDL250H, IC697MDL250I, IC697MDL250J, IC697MDL250K, IC697MDL250L, IC697MDL250M, IC697MDL250N, IC697MDL250P, IC697MDL250Q, IC697MDL250R, IC697MDL250S, IC697MDL250T, IC697MDL250U, IC697MDL250V, IC697MDL250W, IC697MDL250X, IC697MDL250Y, IC697MDL250Z

PLC Module In Stock

GE Fanuc's IC697MDL250 discrete input module has 32 points, including four isolated groups, which ensures that each group of 8 points can be used on different AC power phases. This 120 VAC module is equipped with a 20 ms input filter and is compatible with proximity switches.

The reactive power input of the IC697MDL250 module complies with IEC standard type 2. The LED indicates the on-off status of each point on the circuit logic/PLC side and is easily located on the top of the module. In addition, the input feature can be used in conjunction with a large number of available proximity switches. The IC697MDL250 module uses mechanical keying to ensure proper replacement with similar field types. I/O references are user-configurable, no jumpers or DIP switches are required. The configuration has been completed through MS-DOS or Windows programming software, and the configuration function has been installed on the device.

IC697MDL250 The input circuit of this module can achieve low heat dissipation, which in turn helps to achieve extremely high reliability and service life. It can be used with various input devices, including buttons, limit switches or selector switches, and electronic proximity switches (2-wire or 3-wire).

The module is equipped with a mechanical key to helping prevent accidental replacement of the type in a given slot. This key is suitable for a specific shaped point on the board below the connector. When the module is first installed, the key is fixed on the central rail of the back panel. After removing the module, the key remains in the central rail, requiring the slot to only accommodate the same type of module. If the user needs to change the position of the module in the rack after connecting the key to the rack, the key can be removed by pushing up and unlocking the latch. Then you can reinsert the key and module as needed.

Large in Stock, Including