GE VersaMax IC200PNS001 Module

GE IC200PNS001

Brand: GE Fanuc

Series: Versamax

Part Number: IC200PNS001

Power Consumption:0.60 Amperes at 5 Volts DC

RX3i PLC CPU Version Required: Firmware version 7.0 or later

Proficy Machine Edition Version Required: Version 7.0 or later

Module Dimensions: Height: 132mm (5.2 inches), Width: 134mm (5.28 inches)

Number of Port Connectors: Two RJ-45

USB Connector (for firmware upgrades): One Micro-B connector. USB 2.0 compliant running at Full-speed (12 MHz).

PNS Status and Control Bits: 32 input status bits and 32 output control bits

I/O Data Update on the PROFINET LAN: Configurable: 1ms, 2ms, 4ms, 8ms, 16ms, 32ms, 64ms, 128ms, 256ms, and 512ms

RoHS Compliance: Yes

Operating Temperature Range: 0 to 60 degrees Celsius surrounding air temperature without a fan

About IC200PNS001

The GE Fanuc Versamax IC200PNS001 PROFINET Scanner (PNS) module allows for power from either 1 or 2 sources.

The second supply of power is optional.

The scanner module requires an RX3i PLC CPU with Firmware version 7.0 or newer and the Proficy Machine Edition software version 7.0 or later.

The module coordinates the Versamax remote node with the PROFINET I/O network.

The GE Fanuc IC200PNS001 PROFINET Scanner (PNS) module has functions such as input data retrieval and output data delivery.

It has features such as PROFINET alarms and diagnostics reporting, which allows for the “hot swap” of an excessive power supply that has been de-energized and it allows for configuration with the Classless InterDomain Routing with supernetting and subnetting.

It also offers field upgrade options, and the firmware can be updated via the USB port (the port is intended for firmware upgrades only and not for a permanent connection).

The GE Fanuc IC200PNS001 PROFINET Scanner (PNS) module can connect the remote node to the PROFINET I/O network to oversee the I/O status if the communication is lost.

Other functions include module scanning (both output and input scans), managing the module configuration, PROFINET communication between modules and I/O controllers within the PROFINET Scanner node, and reporting or issuing fault information in the form of diagnostics and alarms to the I/O controller.

In addition, the PNS module’s main remote I/O publishes data on the PROFINET network to an I/O controller and it receives the data generated from an I/O controller on the PROFINET network.

This module has an operating temperature range between 0 and 60 degrees Celsius for the surrounding air temperature with no fan.

Related Products