HE693PBM101 Ge Fanuc Profibus Module

HE693PBM101 Ge Fanuc Profibus Module

Module No.: HE693PBM101

Manufacturer: GE Fanuc

Other series: HORNER HE693PBM101E HE693PBM100J

Users migrating from the HE693PBM101 PROFIBUS Master Module

The following issues should be considered when attempting to migrate applications that used the

HE693PBM101 to the IC693PBM200:

The size of the slave status area for the IC693PBM200 is 128 points by default, compared to the 64

points used by the HE693PBM101. The user may need to consider reducing the size of the slave

status area to match the previous module’s usage.

When the PLC is not scanning its I/O, the IC693PBM200 enters Clear Mode. The HE693PBM101

does not.

In the HE693PBM101, the slave status bits are arranged by the order in which they appeared in the

configuration. In the IC693PBM200, the slave status bits are arranged in order by bus address.

With the HE693PBM101, separate bits and data areas for each slave are used to detect and retrieve

diagnostic data from the slaves. A word of optional input data in the IC693PBM200 informs the

application program that a slave has diagnostic data. The data is then retrieved from the slave using

a COMM_REQ function block. So the Diagnostic Flag area, the Diag_Data Slave Addr area, and

the Diag Data area used by the HE693PBM101 are not present in the IC693PBM200.

The HE693PBM101 has one Module Revision input word. In the IC693PBM200, this input word

has been combined with the new Slave Diag ID input word to form an optional 2-word input area.

The IC693PBM200 uses 16 fewer sync/freeze control bits and these bits are now optional.

The user may wish to disable fault reporting in the IC693PBM200 to match the behavior of the

HE693PBM101.

More Fanuc Modules