Honeywell 10006/2/1-08803 Output Module

The Honeywell 10006/2/1-08803 serves as the primary 10006/2/1 Digital Output Module utilized to execute direct high-current load driving across Honeywell industrial control platforms.

Hardware Specifications

4-20 mA HART Loop Protocol & Channel Isolation

The module processes discrete logic signals from the central controller to drive up to six independent 24 VDC output channels, each capable of delivering 550 mA for switching loads up to 13 W. Built-in high-voltage galvanic isolation rated at 2500 Vdc isolates field-side actuator circuits from internal backplane logic, preventing transient voltage spikes and ground loops from affecting system operation. Onboard channel monitoring and fail-safe execution routines ensure outputs drop to a defined safe state during communication loss or power faults.

Frequently Asked Questions

Q: What is the maximum inductive and resistive load capacity per individual channel?

A: Each channel supports up to 550 mA at 24 VDC, driving resistive or inductive actuators up to 13 W per point without requiring external interposing relays.

Q: How does the 2500 Vdc galvanic isolation protect the system architecture?

A: The 2500 Vdc isolation barrier prevents field-side electrical surges, high-voltage transients, and ground potential differences from propagating to the backplane processing electronics.

Field Installation Guidelines

1. Power down the rack chassis power supply before inserting or extracting the module from its slot.
2. Verify that field loads do not exceed the per-channel limits of 24 VDC and 550 mA (13 W maximum).
3. Connect field signal wiring using shielded cables, terminating shields at a single-point earth ground on the cabinet entry bar.
4. Ensure adequate cabinet air circulation to maintain ambient environmental temperatures within the -20 deg C to 70 deg C operational rating.