Honeywell 51196653-100 TDC 3000 Five-slot File Power Supply

Honeywell 51196653-100 5-slot File Pwr Supply EC

This is the newest power supply for the 5-slot chassis and is CE-compliant. This supply uses the standard 3-pin connector (as shown), and requires a replacement cable when used with the original 5-slot chassis having the 8-pin power connector.

All our power supplies are shipped pinned for the internal line frequency clock. If the Sequence of Events (SOE) functionality is required on a NIM, the clock master, the clock slave, and the NIMs with SOE requirements must be pinned for use with external clocks. All other nodes are pinned for the internal (line frequency) clock. The jumper is located on the printed circuit board directly behind the finger connector and is clearly marked (EXT) and (INT).

51196653-100 TDC 3000 Brief Information

Manufacturer: Honeywell

51196653-100

TDC 3000

Five-slot File Power Supply

Chassis Power Supply

CE-compliant

standard 3-pin connector

Honeywell Power Systems

Both power systems provide 24 Vdc power to the Advanced Process Manager Module and I/O Subsystem, and 24 Vdc transmitter power is provided through

standard FTA connections. Both power systems support single or redundant power supplies in a highly compact space.

A single LED on each power module of the AC-Only system annunciates power loss, while the standard system has separate LED indicators for:

•Loss of ac power

•Loss of dc power

•Improper charging of the backup battery

•failure or disconnection of the battery

•High temperature

The standard APM power system delivers 20 amps. Two power supply sizes are available for the AC-Only power system—8 amp and 16 amp.

Honeywell in Stock