Honeywell CC-PAOH01 Analog Output Module

CC-PAOH01 Description

Part Number: CC-PAOH01

Model: Analog Output Module with HART

Manufacturer: Honeywell

Product Info.

Experion Series C input/output chassis-less mounted modules and field level network gateways provide

the physical connection between an automation system and the process when used with the C300 Controller.

Input/Output Modules and field terminations are combined in the same area.

The Input/Output Modules are plugged into Input /Output Termination Assemblies to eliminate the need for a separate chassis to hold the electronics assemblies.

C300 Controller CC-PAOH01

The C300 Controller is constructed using the Series C form factor that employs an Input-Output Termination Assembly (IOTA) and an electronics module which mounts and connects to the IOTA.

One C300 Controller contains all of the control functionality and the communications functions with plug-in modules.

The C300 Controller may operate in both non-redundant and redundant configurations.

Redundant operation requires a second identical controller and connecting cables, which is the typical configuration.

The C300 Controller is connected to the associated I/O hardware by a pair of I/O Link Interface cables

The table below identifies the C300 Controller components and their associated components.

TheC300 Controller supports the non-redundant and fully redundant operation.

Redundancy is built into the controller so that just by adding another controller and a redundancy cable; a redundant controller pair is achieved.

Note that the ‘CC’ designation on the model number indicates the printed wiring boards are conformally coated for additional protection from the environment, (CU = uncoated).

Highly Recommend