Honeywell CC-PFB401 51405044-175 Fieldbus Interface Module

Honeywell CC-PFB401 51405044-175Overview

In virtually all configurations, the Series C controller and I/O provides process useful, maintainable process equipment connections in a smaller footprint than existing competitors and Honeywell equivalent products. Series C is a major contributor to overall savings in a project’s total installed cost. IOTA sizes vary based on the application. Some generalities can be made, however. In general, an analog module has 16 points and resides on a 6 inch (152mm) IOTA for nonredundant applications and a 12 inch (304mm) IOTA for redundant applications. A discrete module has 32 points and resides on a 9-inch (228mm) IOTA for non-redundant applications and a 12 inch IOTA for redundant applications. Specific information on the size of a particular module can be found in the Model Number Table.

Manufacturer: Honeywell

Product No.: CC-PFB40151405044-175

Product type: Fieldbus Interface Module

Module Type: Series C module

Physical Interface: H1 FOUNDATION Fieldbus

Number of H1 Networks per FIM:4

Configurations: Non-redundant or Redundant (side-by-side)

Maximum Number of Fieldbus Devices per H1 Network: 16

Available macrocycle periods: 250, 500 ms; 1, 2, 4, 8, 16, and 32 sec

Shipping Weight: 3 Kg

Unique Features of Series C I/O CC-PFB401 51405044-175

• New modules “tilted” for better heat distribution.

• I/O Module and field terminations are combined in the same area. The I/O Module is plugged into the IOTA to eliminate the need for a separate chassis to hold the electronics assemblies

• Two-level “detachable” terminals for landing the field wiring in the enclosure, providing easier plant installation and maintenance.

• Field power is supplied through the IOTA, with no need for extra power supplies and the associated craft wired marshaling.

• Redundancy is accomplished directly on the IOTA without any external cabling or redundancy control devices, by simply adding a second IOM to an IOTA. The C300 redundancy is accomplished with a cable physically connecting two C300 Controllers in a redundant configuration.

Series C CC-PFB401 51405044-175 Fieldbus Integration Solutions

– Latest offering – part of R300 Series C

– Integrates transparently with the C300 Controller

– Supports four (4) H1 Fieldbus links

– Redundant or non-redundant

– Uses Series C I/O Termination Assembly

– Very high-capacity design

CC-PFB401 51405044-175 Basic Architecture

Honeywell Products in Stock