Honeywell FS-CCI-HSE-30 51506993-330 SM RIO Ethernet Cable

The Honeywell FS-CCI-HSE-30 51506993-330, also cataloged as the Honeywell FS-CCI-HSE-30 SM RIO Ethernet Cable, operates as a dedicated hardware component for high-fidelity physical signal transmission within industrial control architectures. Configured for deterministic data routing, the cable links remote input/output (RIO) chassis to central distributed control system nodes.

Hardware Specifications

Process Control & Network Topology Characteristics

• 4-20 mA HART Loop Protocol Noise Suppression: Employs structured shielded twisted-pair physical architecture to mitigate high-frequency electromagnetic field emissions, preventing induced voltage ripple from distorting concurrent 4-20 mA HART analog signaling lines routed in parallel infrastructure.

• FOUNDATION Fieldbus / Profibus PA Subsystem Coexistence:

  Maintains balanced physical layer differential impedance parameters, enabling long-distance data transmission without cross-talk or impedance mismatches that could degrade adjacent low-speed fieldbus segments.

• Channel-to-Channel Electrical Isolation Preservation: The heavy-duty chemical and abrasion-resistant outer jacket provides strict insulation properties, maintaining the grounding integrity of physically isolated I/O sub-networks and blocking stray common-mode potentials.

Frequently Asked Questions

Q: Can this cable assembly be run through industrial air plenum spaces without metallic conduit?

A: Yes. The outer jacket material is officially fire-resistant and plenum-rated, qualifying it under standard industrial codes for installation within environmental air handling systems due to low flame-spread and smoke-generation properties.

Q: How does the internal shield structure protect against electromagnetic interference (EMI)?

A: The cable utilizes a continuous internal shield wrap that encapsulates the twisted-pair data conductors. This structural barrier routes high-frequency RFI and EMI currents away from the core conductors directly to the designated drain wire termination.

Q: What data communication standards are verified for this specific hardware link?

A: The hardware construction supports high-speed industrial Ethernet frameworks alongside diverse data protocols and automation communication standards typically deployed within the Honeywell Safety Manager (SM) RIO topology.

Field Installation Guidelines

• Maintain a static minimum bend radius of at least 8 times the overall cable outer diameter during positioning to protect the internal twisted-pair geometry and foil shielding layer from tearing.
• Ensure that the integrated shield drain wire is connected to a single verified functional earth ground point at the marshaling panel side; the field instrument side must remain floating to eliminate ground loops.
• Route the communication cable along separate pathways from high-voltage AC motor power lines or variable frequency drive cables, maintaining a minimum physical clearance of 300 mm.