Honeywell TK-FTEB01 Ethernet Module

Product Details

Manufacturer : Honeywell

Product No. : TK-FTEB01

Product type : 51309512-175 Ethernet Module

For use with : Experion LS I/O module

Series : Chassis series-A

Weight : 0.28 Kg

Shipping weight : 2 Kg

Full Description: Honeywell TK-FTEB01 ControlLogix FTE Ethernet Bridge Module

Product Specifications

Brand/Manufacturer: Honeywell

Part Number: TK-FTEB01

Alternate Part Number: 51309512-175

Description: Fte Bridge Module

Dimensions: 3.5x14x14.5cm

Weight: 0.28 kg

Product typeL EtherNet Module

For use with:Experion LS I/O Module

Series:Chassis Series-A

TK-FTEB01

Step 1: Read the product description

The first step seems simple enough, but many engineers fail.

The first step of programming is to read the instructions carefully.

First, you should read the safety rules.

You should know which executing agencies are likely to cause personal injury, which institutions are most likely to collide with each other, and how to solve the most deadly problems when there is a danger.

In addition, the features, usage and debugging methods of each component of the device are also in the instructions.

Even if the program is correct, if the component is not properly debuggable, the device cannot work.

In addition, all the circuit diagrams, pneumatic and hydraulic circuit diagrams, and assembly diagrams are also in the manual, so you need to read it to see what modifications each component can make.

Step 2: Check I/O according to the instructions

Check I/O, commonly known as "dot".There are many ways to check I/O, but be sure to check it in turn according to the address provided in the instructions, and in the case of absolute safety.

When checking the input point, the general input signal is nothing more than a variety of sensors, such as capacitance, inductance, photoelectric, piezoresistive, ultrasonic, magnetic sensing and travel switch sensors.

It is relatively easy to check these components by placing the workpiece on the workstation according to the component instructions, or by moving the actuator to check whether the sensor has a signal.Of course, different devices may test differently, depending on the situation.

Hot Recommend