IC693MDL753 | GE Fanuc | Series 90-30 Discrete Output

Product Overview

The GE Fanuc IC693MDL753 provides 32 discrete sourcing outputs for the Series 90-30 Programmable Logic Controller. This positive logic module operates at 12/24 VDC and delivers up to 0.5 Amps per point, making it ideal for driving industrial actuators, solenoids, and indicators. The internal architecture organizes the 32 points into four isolated groups of eight, each with a dedicated common, allowing for flexible load management across different power sources. We supply this module as 100% Brand New original equipment, ensuring maximum autoritativeness and long-term reliability for your industrial control architecture.

Technical Specifications

Engineering Advantages

• High-Density Sourcing Architecture: The IC693MDL753 utilizes a positive logic (sourcing) design, switching the load on the positive side of the DC power supply. This 32-point density significantly reduces rack space requirements in high-I/O count applications.

• Isolated Group Flexibility: The module separates outputs into four independent groups (A, B, C, and D). This isolation enables a single module to control different load types or circuits powered by separate external 12/24V sources simultaneously.

• Robust Load Protection: Onboard opto-couplers provide a secure barrier between the field-side electrical noise and the sensitive PLC backplane logic. This protection prevents field surges from damaging the CPU or other rack components.

• Enhanced Current Distribution: Each group common utilizes two pins on the front-facing 24-pin connectors. Connecting to both pins doubles the contact area, safely handling the maximum 3A group current and reducing heat generation at the connection point.

FAQs

• Can the IC693MDL753 drive loads at different voltages simultaneously?

  Yes. Because the module features four isolated groups, you can provide different external power sources (within the 10.2 to 28.8 VDC range) to each group, allowing for varied load voltages on a single card.

• Which connectors interface with Output Groups C and D?

  Output groups A and B interface via the connector on the right side of the module face, while groups C and D utilize the connector on the left side.

• Does this module support both sourcing and sinking configurations?

  No. The IC693MDL753 is strictly a positive logic (sourcing) module. If your field devices require the controller to switch the negative side of the circuit, you must select a negative logic (sinking) module instead.