Siemens 6DD1610-0AH0 Flash Memory Module

6DD1610-0AH0 Siemens Module 6DD1610 Series Hardware Introduction

Siemens 6DD1610 can configure hardware modules and software components as an application system through graphical software tools. According to different task requirements, users combine the CPU module, input/output module, and communication module in one case. The efficient real-time operating system is responsible for the processing of the user's task program, and the task running cycle can reach 100 microseconds.

The hardware of the Siemens 6DD1610 system consists of different modules. The type and number of hardware modules required for an actual Siemens 6DD1610 application system are determined according to the specific requirements of the application for peripherals (I/O), communication connections, and computing power.

The Siemens 6DD1610 system consists of the following hardware modules

1. CPU module PM6 is a 64-bit processor module with extremely high computing power, which can be used in various open and closed-loop control occasions. The allowable limit run cycle is 0.1ms, and a typical application configuration cycle is about 0.5ms.

2. Communication buffer Module When multiple processor modules are running in one chassis, the MM4 module must be added between processors to complete the data exchange between processors.

3. Input/output module IT42 provides input/output extension of analog quantity, switching quantity, and incremental coding signal for the PM6 module. EB11 and EM11 modules provide SIMADYN D with additional input/output extension modes of analog quantity, switching quantity, and incremental coded signals.

4. Communication module Application Communication module (CSxx) and communication sub-module can realize a variety of powerful connections (PROFIBUS, industrial Ethernet, optical fiber communication between chassis). CS7 module communication sub-module SS4(support DUST/USS protocol), SS5 (support module of PROFIBUS Fieldbus interface). CS12 and CS22 modules are used for fiber optic connections between chassis. CSH11 module supports industrial Ethernet protocol and realizes the connection between the SIMADYN D system and industrial Ethernet.

5. Special module HVDC transmission application special module; Signal processing module EP31; Plug-in extension module IT1 and IM31 of EP31; Laser module LM31, IO31 for special occasions.

6. The case has 24 slots and two backplane buses to realize high-speed data transmission. Multiple cases can be connected through the optical fiber to form a multi-machine system to complete complex tasks. There are three voltage levels of power supply to choose from, namely 24V DC, 110V DC, 115V/230V AC power supply.

Siemens Module 6DD1610 Series Part Number