TRICONEX CM3201 Communication Module

Communication Interface Module CM3201 Introduction

The TCMI provides an interface between the Fault Tolerant Ethernet (FTE) based Enhanced Universal Control Network (EUCN) and Triconex Tricon Safety Manager System.

The TCMI requires the use of a pair (two; one-part number 4351A and one part number 4351B) of TCMs in the Triconex system. The TCMs connecting to the TCMI must reside in a single Triconex System logical slot and shall occupy the left and right module physical slots (which comprise a single logical slot). At least 1 port on each of the TCMs is required to configure a redundant TCMI pair. If empty ports are not available in existing installed TCMs, then new TCMs must be installed.

The TCMI CM3201 is a redundant device capable of:

•Bi-directional communication with Triconex systems 10.3 and above.

•Execution of data mapping of TRICON memory tables to EUCN format.

•Data conversion to EUCN data types (Tag. Parameter), an engineering unit, and EUCN communication functions.

•Execution of reading and write a function to TRICON memory tables

•Definition of signal alarm conditioning and messaging on the EUCN for alarm handling, annunciation, and diagnostic status reporting.

•Direct peer-to-peer communication with other EUCN connected devices as Enhanced HighPerformance Process Managers (EHPM), Enhanced Logic Managers (ELMM), or Honeywell Safety Manager (SM)

•Communication with operators, engineers, and maintenance personnel at the Universal Stations, EST & ESVT via ENIM.

•Support of higher-level strategies through communication with Application Modules and host computers on the Local Control Network via ENIM.

•Database restoration of TCMI Module from the History Module via ENIM.

•Available in two hardware mounting form, front and rear cabinet access mounting (MC-ZTCMIR or MC-TCMIR1), Front only cabinet access mounting (MC-ZTCMI2 or MC-TCMIR2)

TRICONEX Products