Yokogawa AIP601 S1

Equipment in Cabinet

FCU: 1

Power Distribution Board with Built-in HKU: 1(Dual or single power supply)

Power Supply Bus Unit, Vertical Type (AEPV7D): 2(1 at front and 1 at rear)

Node Fan Unit (ANFAN) (*1): Max. 4(2 at front and 2 at rear)

Door Fan Unit (AIP601): 4(2 for front doors and 2 for rear doors)

Module Configuration in FCU

Power Supply Module (PW481, PW482, or PW484):

2 modules in case of a dual-redundantconfiguration.

Processor Module (CP471 or CP461):

2 modules for dual-redundantconfiguration.

A dual-redundant configuration is enabledby using 2 identical modules with the same

model code (CP471 or CP461).

ESB Bus Coupler Module (EC401 or EC402):

2 modules in case of a dual-redundantconfiguration.

I/O Modules (*1): Max. 6

Installation Restrictions

To install Optical ESB Bus Node Units (ANB11£) or ESB Bus Node Units (ANB10£) in a remote location, use theOptical ESB Bus Repeater Master Module (ANT401 or ANT411) to connect them with an optical fiber cable. Toinstall Optical ESB Bus Repeater Master Modules in the FCU, install a pair of modules in slots 1 to 6 from right toleft according to the number of branches. In a single configuration, install the individual modules in slots 1, 3, and 5in order from right to left. For details, see “Optical ESB Bus Repeater Module” (GS 33J60F51-01EN/GS 33J60F52-01EN).

HARDWARE CONFIGURATION

When installing ESB Bus Node Units in the cabinet using ESB Coupler Module (EC401), up to 9/FCU (AFV40) canbe installed.

When installing ESB Bus Node Units in the cabinet using the ESB Coupler Module (EC402), up to 11/FCU (AFV40)can be installed.

Up to 5 node units can be installed at the front of the cabinet, and up to 6 node units at the rear.

We Also Handle